Fixed: IRQL_NOT_LESS_OR_EQUAL Stop Code in Windows 11/10/8/7

Anne

Updated on May. 11, 2023


Position: Resource - Disk Utilities - Fixed: IRQL_NOT_LESS_OR_EQUAL Stop Code in Windows 11/10/8/7

Summary
This page talks about the blue screen stop code IRQL_NOT_LESS_OR_EQUAL, including symptoms, possible causes and 7 solutions. The error prevents computer from booting into Windows 11/10/8/7 normally, and yet it can be repaired easily in many cases. Following steps given in this article to get your computer working again.
DiskGenius

DiskGenius - Professional data recovery software that can retrieve data from BSOD computer, recover formatted / RAW / lost partitions, undelete files in Windows 11/10/8/7.



What Does IRQL_NOT_LESS_OR_EQUAL Mean?

"Your device ran into a problem and needs to restart. We're just collecting some error info, and then we'll restart for you.
90% complete
For more information about this issue and possible fixes, visit https://www.windows.com/stopcode
If you call a support person, give them this info:
Stop code: IRQL NOT LESS OR EQUAL"

irql not less or equal

In computing, IRQL stands for "Interrupt Request Level". It is a priority level assigned to each device connected to a computer system that determines how much priority the device has to access system resources. The higher the IRQL level, the more priority a device has to perform its tasks. IRQL is used by the operating system to manage and prioritize system resources and to prevent conflicts between different devices and drivers.

In the context of a Blue Screen of Death (BSOD) error message, the IRQL_NOT_LESS_OR_EQUAL is a common error message that appears on Windows operating systems when there is a problem with the computer's memory or drivers. The error message indicates that a process or driver attempted to access a memory address at a higher interrupt request level (IRQL) than it was allowed to. This error can cause the system to crash or shut down unexpectedly.

What Are the Possible Causes of IRQL_NOT_LESS_OR_EQUAL?

What is the root cause of IRQL_NOT_LESS_OR_EQUAL? The causes of the IRQL_NOT_LESS_OR_EQUAL error can vary, but some of the most common reasons include outdated or incompatible drivers, faulty hardware, and corrupt system files. In some cases, the error may be caused by a virus or malware infection. The most common ones are:

  • Faulty hardware: This error can be caused by faulty hardware components such as a failing hard drive, memory module, or graphics card.
  • Corrupt or outdated drivers: Drivers are software that helps your hardware communicate with your operating system. Corrupt, outdated or incompatible drivers can cause IRQL_NOT_LESS_OR_EQUAL errors.
  • Overclocking: Overclocking can lead to instability in the system, causing this error.
  • Malware or virus infection: A malware or virus infection can cause system files to become corrupted, leading to this error.
  • Windows system file corruption: Corruption in the Windows operating system files can also cause this error.
  • Damaged software installation: Installation or update of software can go wrong, which can result in corrupted files that lead to this error.
  • Memory issues: Issues with the computer's RAM can also cause IRQL_NOT_LESS_OR_EQUAL errors.
  • Incompatible hardware: Incompatible hardware can cause conflicts in the system and lead to this error.

These are just some of the possible causes of the IRQL_NOT_LESS_OR_EQUAL error. If you are experiencing this error, you can try solutions provided in this article to fix the issue.


How to Fix IRQL_NOT_LESS_OR_EQUAL Error in Windows 11/10/8/7?

IRQL_NOT_LESS_OR_EQUAL is a Blue Screen of Death (BSOD) error that usually occurs due to issues with drivers, hardware, or corrupted system files. Here are some methods you can try to fix this error:

Solution #1: Restart Your Computer

The first step to take is to restart your computer. This may fix the error, especially if it's a temporary issue. So, if you haven't restarted computer already, go ahead to restart your computer and see if the error persists.

Solution #2: Check for Windows Updates

Outdated system files can cause the IRQL_NOT_LESS_OR_EQUAL error. To fix this issue, check for any available Windows updates and install them. Here's how to do it:

Step 1. Press the Windows key + I to open the Settings app.

Step 2. Click on "Update & Security" and then click "Check for updates".

Step 3. Install any available updates.

Solution #3: Check Your Hardware

Faulty hardware can cause the IRQL_NOT_LESS_OR_EQUAL error. Run hardware diagnostics to check for any issues with your RAM, hard drive, or other components. To run hardware diagnostics, you can use the built-in Windows Memory Diagnostic tool or a third-party tool like MemTest86.

Step 1. To run the Windows Memory Diagnostic tool, press the Windows key + R to open the Run dialog box.

Step 2. Type "mdsched.exe" (without quotes) and press Enter.

Step 3. Click "Restart now and check for problems".

IRQL_NOT_LESS_OR_EQUAL

Step 4. Wait for the scan to complete.

Solution #4: Check for Driver Updates

Outdated or faulty drivers can cause the IRQL_NOT_LESS_OR_EQUAL error. To fix this issue, you can check for driver updates in Device Manager or download the latest drivers from the manufacturer's website.

Step 1. Press the Windows key + X and select "Device Manager".

Step 2. Expand the device category that has a yellow exclamation mark next to it.

Step 3. Right-click on the device and select "Update driver".

IRQL_NOT_LESS_OR_EQUAL

Step 4. Follow the on-screen instructions to install the latest drivers.

Alternatively, you can download the latest drivers from the manufacturer's website and install them manually.

Solution #5: Run a System Scan

Checker (SFC) scan System File Checker is a tool that scans for and repairs corrupt system files. To run an SFC scan, follow these steps:

Step 1. Press the Windows key + X and select "Command Prompt (Admin)".

Step 2. Type sfc /scannow and press Enter.

Step 3. Wait for the scan to complete.

IRQL_NOT_LESS_OR_EQUAL

Solution #6: Run a DISM Scan

Deployment Image Servicing and Management (DISM) is a tool that repairs corrupt system files. To run a DISM scan, follow these steps:

Step 1. Press the Windows key + X and select "Command Prompt (Admin)".

Step 2. Type "DISM /Online /Cleanup-Image /RestoreHealth" (without quotes) and press Enter.

Step 3. Wait for the scan to complete.

Solution #7: Check for Malware

Malware can cause the irql not less or equal error. Run a malware scan using Windows Defender or any other reputable antivirus software.

Step 1. Press the Windows key + I to open the Settings app.

Step 2. Click on Update & Security > Windows Security > Virus & threat protection > Scan options.

Step 3. Select the type of scan you want to run (Quick scan, Full scan, or Custom scan).

Step 4. Click on "Scan now" to start the scan.

If none of these solutions fix the IRQL_NOT_LESS_OR_EQUAL error, you may need to consider a system restore or resetting your PC to its factory settings. If the issue persists, contact a professional technician or Microsoft support for further assistance.


Extra Tip: How to Create a Bootable USB Disk to Deal with BSOD Computer?

Booting your computer from a USB flash drive can be useful when you need to install a new operating system, perform a system repair, or run a virus scan. Here are the steps to create a bootable USB flash drive and boot computer from it:

Part 1: Create a Bootable USB Flash Drive using DiskGenius Free Edition

Step 1. Insert the USB flash drive into an available USB port on your computer that can boot into Windows 10 or 11.

Step 2. Install and run DiskGenius Free Edition on this computer. Select the USB drive which will be created as bootable disk, then click "Tools" – "Create WinPE Bootable USB Drive of DiskGenius".

IRQL_NOT_LESS_OR_EQUAL

Step 3. Click "OK" button on the pop-up window.

IRQL_NOT_LESS_OR_EQUAL

Step 4. Wait for a couple of seconds, the bootable USB disk will be created successfully.

IRQL_NOT_LESS_OR_EQUAL

Step 5. Eject the USB flash drive. Once the bootable files have been copied onto the USB flash drive, safely eject it from your computer.

Your bootable USB flash drive is now ready to use. You can insert it into a computer and boot from it by following the steps outlined in Part 2.

Part 2: Boot the BSOD Computer from the Bootable USB Flash Drive

Step 1. Insert the USB flash drive into an available USB port on the unbootable computer.

Step 2. Restart your computer, and immediately start pressing the appropriate key to access the boot menu. This key varies by manufacturer, but it is typically F2, F12, ESC, or Del. Check your computer's manual or look for on-screen instructions during startup to determine which key to press.

Step 3. Access the boot menu: Once you access the boot menu, use the arrow keys to highlight the option for booting from a USB flash drive, and press Enter. Save changes and exit BIOS.

IRQL_NOT_LESS_OR_EQUAL

Step 4. Your computer will restart on its own and then boot from the USB flash drive.

Once your computer has booted from the USB flash drive, DiskGenius will be launched automatically. If you want to access Command Prompt, click the Start menu to locate it.

IRQL_NOT_LESS_OR_EQUAL

Frequently Asked Questions

1. What is IRQL_NOT_LESS_OR_EQUAL in Windows 2000?

IRQL_NOT_LESS_OR_EQUAL is a blue screen of death (BSOD) error message that can occur in Windows 2000. It typically indicates that there is a problem with a driver or hardware device that is causing an interrupt request level (IRQL) that is higher than it should be.

2. What is Irql_not_less_or_equal after changing RAM?

"Irql_not_less_or_equal" is a common Blue Screen of Death (BSOD) error message in Windows, and it indicates that there is a problem with a driver or hardware. When this error occurs after changing RAM, it could mean that the new RAM is either faulty or incompatible with your system.

3. Can SSD cause IRQL not less or equal?

Yes, an SSD (Solid State Drive) can potentially cause the IRQL_NOT_LESS_OR_EQUAL error to occur on a Windows system. However, it is less common than some of the other causes of this error.

One possible cause of the error is a faulty SSD driver. If the driver for your SSD is outdated, incompatible, or corrupted, it can cause this error to occur. You can check for driver updates through Device Manager or the manufacturer's website.

Another potential issue with an SSD is firmware problems. If the firmware on your SSD is outdated or corrupted, it can cause the IRQL_NOT_LESS_OR_EQUAL error to occur. You can check for firmware updates on the manufacturer's website.

It is also possible that the SSD itself may be faulty or failing, which can cause this error. You can check the health of your SSD using diagnostic software provided by the manufacturer.

In summary, while an SSD can cause the IRQL_NOT_LESS_OR_EQUAL error to occur, it is less common than other causes such as faulty hardware or outdated drivers. If you suspect that your SSD is causing this error, you can try updating the driver or firmware, or running diagnostics to check for hardware issues.

4. How do I stop IRQL less or equal in Windows 10?

There are several steps you can take to try to stop the IRQL_NOT_LESS_OR_EQUAL error from occurring in Windows 10. Here are some possible solutions: update your drivers, check if the RAM works well, run a system scan, check for malware, or restore OS to a previous state.

5. Can overheating cause IRQL not less or equal?

Yes, overheating can cause the IRQL_NOT_LESS_OR_EQUAL error to occur on a Windows system. When a computer's CPU or graphics card overheats, it can cause instability in the system, leading to the error message. Overheating can also cause other problems, such as system crashes, freezes, and slowdowns.

When a computer overheats, the cooling system may not be able to keep up with the heat generated by the CPU or graphics card. This can cause the components to become unstable, leading to crashes and errors such as IRQL_NOT_LESS_OR_EQUAL.

To prevent overheating, it is important to ensure that your computer's cooling system is functioning correctly. You can clean the fans and vents of dust and debris, ensure that there is adequate airflow around the computer, and check that the cooling system is working correctly. If you are still experiencing the error message after addressing potential overheating issues, it may be necessary to seek professional help to diagnose and fix the issue.

6. What causes a corrupted graphics driver?

A corrupted graphics driver can be caused by a variety of factors, including, installation errors, malware or virus infection, power failure, outdated driver, overclocking, hardware issues, and Windows system updates. It is important to keep your graphics driver up-to-date to prevent compatibility issues and other problems. If you suspect that your graphics driver is corrupted, you can try updating the driver or reinstalling it to fix the issue.

7. How do I know if my Windows 10 driver is corrupted?

If you suspect that a driver on your Windows 10 system is corrupted, you can look for some common signs that indicate that the driver is not working correctly. Here are some symptoms to look for:

  • System crashes or freezes: A corrupted driver can cause your system to crash, freeze, or display a blue screen of death (BSOD).
  • Device malfunctions: A corrupted driver can cause your device to malfunction or stop working altogether. For example, a corrupted graphics driver may cause your computer to display distorted images or video.
  • Error messages: You may receive error messages related to the driver. For example, you may see an error message that says "Windows has stopped this device because it has reported problems" in Device Manager.
  • Slow performance: A corrupted driver can slow down your system's performance, causing it to respond slowly or take longer to boot up.
  • Missing or outdated driver: If you cannot find a specific device driver in the Device Manager or if the driver version is outdated, it may be corrupted.

8. What is IRQL that is too high?

The "IRQL that is too high" error message is less common and can occur when a device or driver is trying to access a lower IRQL level than it is permitted to access. This can happen when a device or driver is not properly configured or when there are conflicts between different devices or drivers. The "IRQL that is too high" error can cause system instability, crashes, and other issues. If you are experiencing this error message, it is recommended to troubleshoot your system and identify the underlying cause of the error, which could be due to faulty or outdated drivers, conflicts between devices or drivers, or other software-related problems.

9. Can RAM cause blue screen?

Yes, RAM (Random Access Memory) can cause a blue screen error, also known as a Blue Screen of Death (BSOD) in Windows. The BSOD error message can indicate a variety of errors related to memory, such as "MEMORY_MANAGEMENT" or "PAGE_FAULT_IN_NONPAGED_AREA", which are commonly caused by faulty or incompatible RAM. If your computer is experiencing frequent BSOD errors, it is possible that one or more of the RAM modules are faulty or have compatibility issues with your system.

10. How do I fix VSS errors in Windows 10?

VSS errors in Windows 10 can be caused by a variety of factors, such as system file corruption, conflicts with other software, or outdated drivers. Here are some steps you can take to try to fix VSS errors in Windows 10: run the SFC tool, check for Windows updates, restart the Volume Shadow Copy service, uninstall conflicting software, and update drivers.

11. Is IRQL not less or equal a virus?

No, "IRQL not less or equal" is not a virus. It is actually a Blue Screen of Death (BSOD) error message that is caused by a software or hardware issue on your computer. The error message usually indicates that a driver has tried to access a memory address that it is not allowed to access, which can cause system instability and crashes.

While there are some viruses and malware that can cause BSOD errors, "IRQL not less or equal" is not specifically associated with any virus or malware. If you are experiencing this error message, it is recommended to troubleshoot your system and identify the underlying cause of the error, which could be due to a faulty driver, a hardware issue, or other software-related problems.

12. How to bypass Windows 11 incompatibility?

If you are trying to install Windows 11 on a system that does not meet the minimum system requirements, it is not recommended to bypass the compatibility checks as this could lead to instability and security risks. It may be necessary to upgrade your system hardware or to continue using a compatible version of Windows on your current system.

13. How do I fix infinite blue screen recovery on Windows 10/11?

An infinite blue screen on Windows 10 or 11 can be caused by a variety of reasons, including hardware failure, driver issues, software conflicts, or even malware infections. Here are some steps you can take to troubleshoot and fix the issue: restart computer, boot into Safe Mode, install Windows updates, run a malware scan, check hardware components, update drivers, restore system to a previous point.

14. How do I stop Windows 10 from collecting error info?

Windows 10 collects error information to help diagnose and fix problems that occur on your system. Once you've disabled the Windows Error Reporting Service, Windows will no longer collect error information from your system. Note that this may make it more difficult to diagnose and fix problems on your system, so it's not recommended unless you have a specific reason for disabling error reporting. If you don't want to share this data with Microsoft, you can disable error reporting by following these steps:

Step 1. Press the Windows key + R to open the Run dialog box. Type "services.msc" and press Enter to open the Services app.

Step 2. Scroll down the list of services until you find "Windows Error Reporting Service".

Step 3. Right-click on the service and select "Properties". In the "Windows Error Reporting Service Properties" dialog box, set the "Startup type" to "Disabled". Click "Apply" and then "OK" to save the changes.

15. How do I disable unnecessary drivers in Windows 10?

Note that disabling drivers can sometimes cause issues with your system, so it's important to only disable drivers that you know are unnecessary or causing problems. If you're unsure about a particular driver, it's best to leave it enabled. To disable unnecessary drivers in Windows 10, follow these steps:

Step 1. Open the Device Manager by pressing the Windows key + X and selecting "Device Manager" from the menu that appears.

Step 2. In the Device Manager, locate the device driver that you want to disable. Right-click on the driver and select "Disable device" from the context menu. Alternatively, you can also select "Uninstall device" to completely remove the driver from your system.

Step 3. In the confirmation dialog box, click "Yes" to confirm the action. Repeat steps 2-4 for any other drivers that you want to disable.

16. Why is my D drive 100%?

A 100% disk usage on your D drive could be caused by several reasons. Here are some possible causes: background processes, malware or Virus, insufficient RAM, fragmented driver, the drive is running out of free space, or faulty hardware.


More Guides

DiskGenius

DiskGenius - Free disk partitioning software for Windows PCs and servers to extend partition, partition hard drive, format SSD, clone SD card, wipe hard drive data and more.



Was This Page Helpful?

22

DiskGenius

DiskGenius Standard Edition

DiskGenius is a one-stop solution to recover lost data, manage partitions, and back up data in Windows.

Download
Copyright © 2010-2024 Eassos Ltd. All Rights Reserved.